Renault Clio: Engine coolant

Renault Clio. Engine coolant


With the engine switched off and on level ground, the level when cold must be between the MINI and MAXI marks on reservoir 1.

Top this level up when cold before it reaches the MINI mark.

When working in the engine compartment, ensure that the windscreen wiper stalk is in the park position.

Risk of injury.

Frequency of checking coolant level

Check the coolant level regularly (very severe damage is likely to be caused to the engine if it runs out of coolant).

If the level needs to be topped up, only use products approved by our Technical Department which ensure:

Before performing any action in the engine compartment, the ignition must be switched off by pressing the engine stop button (please see the information on “Starting, stopping the engine” in Section 2).

Replacement interval

Refer to the Maintenance Document for your vehicle.

Consult your approved dealer at once if you notice an abnormal or repeated drop in any of the fluid levels.

No operations should be carried out on the cooling circuit when the engine is hot.

Risk of burns.

READ NEXT:

 Brake fluid

The level should be read with the engine switched off and on level ground. This should be checked frequently, and immediately if you notice even the slightest loss in braking efficiency.

 Windscreen washer reservoir

Topping up With the engine switched off, open the cap 3. Fill until you can see the fluid, then replace the cap. Liquid Screen wash product (product with antifreeze in winter).

 Filters

The replacement of filter components (air filter, cabin filter, diesel filter, etc.) is scheduled in the maintenance operations for your vehicle. Replacement intervals for filter elements: refe

SEE MORE:

 Manual gearbox: Identification

JA3 or JA5 or JH3 or JR5 K4J / K4M / K9K / D4F engines are fitted with type JH and JR manual gearboxes. A marking (1) on the gearbox casing indicates: Gearbox type Gearbox suffix Production plant Production number K9K, and TL4 - F4R, and 830, and TL4 Identification plate Engraving Ge

 Front side door sliding window: Removal - Refitting

Note: If the window is broken, replace the sealing film (see Door sealing film: Removal - Refitting) (MR 393, 65A, Door sealing). REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the door trim (see Front side door trim: Removal - Refitting) (MR 393,72A, Side opening element trim), the int

© 2016-2024 Copyright Renault Clio Owners Club