If the battery on the vehicle has been recharged or disconnected, or is not working, the windows will need to be reprogrammed for the express-up feature to work. Before reprogramming, replace or recharge the vehicle's battery.
To program the driver window:
1. With the ignition in ACC/ ACCESSORY or ON/RUN, or when RAP is active, close all doors.
2. Press and hold the power window switch until the window is fully open.
3. Pull the power window switch up until the window is fully closed.
4. Continue holding the switch up for approximately two seconds after the window is completely closed.
The window is now reprogrammed.
Peugeot 208. Engine oil level indicator
System which informs the driver whether the engine oil level is correct or not.
This information is indicated for a few seconds when the ignition is switched on,
after the service information.
Th ...
Peugeot 208. Warning triangle (stowing)
The location for stowing a folded triangle or its box is under the front seat.
Before leaving your vehicle to set up and install the triangle, put on your high
visibility vest.
The dimensions of ...
Skoda Fabia. Correct and safe seated position
WARNING
The front seats and all head restraints must be adjusted to
match the
body size at all times and the seat belt must always be fastened properly to
provide the most effective levels ...