The driver frontal airbag is in the center of the steering wheel.
The front outboard passenger frontal airbag is in the passenger side instrument panel.
The driver knee airbag, if equipped, is below the steering column. The front outboard passenger knee airbag, if equipped, is below the glove box.
Driver Side Shown, Passenger Side Similar
The seat-mounted side impact airbags for the driver and front outboard passenger are in the side of the seatbacks closest to the door.
The roof-rail airbags for the driver, right front passenger, and second row outboard passengers are in the ceiling above the side windows.
Rear Seat Driver Side Shown, Passenger Side Similar
If the vehicle has second row seat‐mounted side impact airbags, they are in the sides of the rear seatback closest to the door.
Warning
If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other airbag covering.
Do not use seat accessories that block the inflation path of a seat-mounted side impact airbag.
Never secure anything to the roof of a vehicle with roof-rail airbags by routing a rope or tie-down through any door or window opening. If you do, the path of an inflating roof-rail airbag will be blocked.
Mazda 2. Message Indicated on Display
If a message is displayed in the centre display (Type C/Type D audio), take
appropriate
action (in a calm manner) according to the displayed message.
Stop Vehicle in Safe Place Immediately
If ...
Mazda 2. Brake System
Foot Brake
This vehicle has power-assisted brakes
that adjust automatically through normal
use.
Should power-assist fail, you can stop by
applying greater force than normal to the
brake pedal. ...
Peugeot 208. Access to the battery
The battery is located under the bonnet. To gain access to it:
open the bonnet using the interior release lever, then the exterior safety
catch,
secure the bonnet stay,
remove the plastic ...