B-Class car manuals
Fiat Punto: Wheels - Techniical speciifiicatiions - Fiat Punto Owners Manual

Fiat Punto: Wheels

Fiat Punto Owners Manual

RIMS AND TYRES

Pressed steel or alloy rims. Tubeless tyres with radial carcass. The homologated tyres are listed in the Log book.

IMPORTANT In the event of discrepancies between the information provided on this “Owner handbook” and the “Log book”, consider the specifications shown in the log book only.

Attaining to the prescribed size, to ensure safety of the car in movement, it must be fitted with tyres of the same make and type on all wheels.

IMPORTANT Do not use inner tubes with Tubeless tyres.

SPACE-SAVER SPARE WHEEL

Pressed steel rim. Tubeless tyre.

WHEEL GEOMETRY

Front wheel toe-in measured from rim to rim: 0 ±1 mm.

The values refer to the car in running order.

UNDERSTANDING TYRE MARKING

Example: 185/60 R 14 82 H

185 = Nominal width (S, distance between sidewalls in mm).

60 = Percentage height/width ratio (H/ S).

R = Radial tyre.

14 = Rim diameter in inches (Ø).

82 = Load rating.

H = Maximum speed rating.

Wheels


Load rating

Load rating


Maximum speed rating

Maximum speed rating


UNDERSTANDING RIM MARKING

Example: 5 1/2 J x 14 H2 35

5 1/2 = rim width in inches (1).

J = rim drop center outline (side projection where the tyre bead rests) (2).

15 = rim nominal diameter in inches (corresponds to diameter of the tyre to be mounted) (3 = Ø).

H2 = “hump” shape and number (relief on the circumference holding the Tubeless tyre bead on the rim).

35 = wheel camber angle (distance between the disc/rim supporting plane and the wheel rim centre line).

Understanding rim marking


Refer to the above
mentioned table for information on the wheels where snow chains can be fitted.

Follow the prescriptions.

COLD TYRE INFLATION PRESSURE (bar)

Cold tyre inflation pressure


Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.

With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.

    Engine codes - bodywork versions

    Dimensions

    Other info:

    Fiat Punto. At the filling station
    PETROL ENGINES Use only unleaded petrol. To prevent errors, the diameter of the fuel tank filler is too small to introduce a lead petrol pump filler. Use petrol with a rated octane number (R.O.N ...

    Honda Fit. How to Refuel
    1. Stop your vehicle with the service station pump on the left side of the vehicle in the rear. 2. Turn off the engine. 3. Press the area indicated by the arrow to release the fuel fill door. Y ...

    Nissan Micra. Fuel-filler door
    Opener operation The fuel-filler door release is located below the instrument panel. To open the fuel-filler door, pull the release. To lock, close the fuel-filler door securely. Fuel-filler ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0094