B-Class car manuals
Honda Fit: Inspecting and Changing Fuses - Fuses - Handling the Unexpected - Honda Fit Owners Manual

Honda Fit: Inspecting and Changing Fuses

Honda Fit Owners Manual

Honda Fit / Honda Fit Owners Manual / Handling the Unexpected / Fuses / Inspecting and Changing Fuses


1. Turn the ignition switch to LOCK . Turn
headlights and all accessories off.

2. Check the fuses in the engine compartment.

► If the fuse is blown, have it replaced by a dealer.


3. Inspect the small fuses in the engine compartment and the vehicle interior.

► If there is a burned out fuse, remove it with the fuse puller and replace it with a new one.

NOTICE

Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system.

Replace fuse with a spare fuse of the same specified amperage.

There is a fuse puller on the back of the engine compartment fuse box cover.

    Fuse Locations

    Emergency Towing

    Other info:

    Mazda 2. Active Driving Display
    WARNING Always adjust the display brightness and position with the vehicle stopped: Adjusting the display brightness and position while driving the vehicle is dangerous as doing so could di ...

    Chevrolet Sonic. Rear Vision Camera (RVC)
    This vehicle may have the RVC system. Read this entire section before using it. The RVC system can assist the driver when backing up by displaying a view of the area behind the vehicle. Warning T ...

    Seat Ibiza. Windscreen
    Athermic windscreen Fig. 69 Location of the electronic pricing device Vehicles with an athermic windscreen have an area without athermal treatment above the rear-view mirror ⇒ fig. 69. Thi ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0078