When replacing, use the following bulb.
Rear License Plate Light: 5 W
1. Push the lens on the left and pull out the lens and the socket attached to it.
2. Remove the license plate light assembly by squeezing the tabs on both sides of the socket.
3. Remove the old bulb and insert a new bulb.
Peugeot 208. Oil level
The check is carried out either when the ignition is switched on using the oil
level indicator on the instrument panel, or using the dipstick.
This manual check will only be correct if the vehicl ...
Chevrolet Sonic. Park Brake and P (Park) Mechanism Check
Warning
When you are doing this check, the vehicle could begin to move. You or others
could be injured and property could be damaged. Make sure there is room in front
of the vehicle in case it be ...
Seat Ibiza. Luggage compartment
Stowing luggage
All luggage must be securely stowed. Please observe the following points to ensure
the vehicle handles well at all times: – Distribute the load as evenly as possible.
– Place ...