The following procedures will help you get started using the Bluetooth® Hands-Free Phone System.
Choosing a language
To change the language, perform the following.
To select the current language, press the PHONE/SEND ( ) button. To select a different language, push the tuning switch ( or ) left or right.
NOTE: You must press the button within 5 seconds to change the language.
Connecting procedure
NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled.
The connecting procedure of the cellular phone varies according to each cellular phone model. Refer to the cellular phone Owner’s Manual for details.
When prompted for a Passkey code, enter “1234” from the handset. The Passkey code “1234” has been assigned by NISSAN and cannot be changed.
Making a call by entering a phone number
Say: “Special Number” to dial more than 10 digits or any special characters.
For additional information, refer to “List of commands” in this section.
Receiving a call
When you hear the ring tone, press the
button on the steering wheel.
Once the call has ended, press the
button
on the steering wheel.
NOTE:
If you do not wish to take the call when you
hear the ring tone, press the
button
on the steering wheel.
For additional information, refer to “List of commands” in this section.
Mazda 2. Wiper Blades
CAUTION
Hot waxes applied by automatic car
washers have been known to affect
the wiper's ability to clean windows.
To prevent damage to the wiper
blades, do not use petrol, paraffi n,
paint thin ...
Chevrolet Sonic. What to Add
Use only new DOT 3 brake fluid from a sealed container. See Recommended Fluids
and Lubricants.
Always clean the brake/clutch fluid reservoir cap and the area around the cap
before removing it. Th ...
Mazda 2. Hill Launch Assist (HLA)
Hill Launch Assist (HLA) is a function
which assists the driver in accelerating
from a stop while on a slope. When
the driver releases the brake pedal and
depresses the accelerator pedal while
on ...