B-Class car manuals
Peugeot 208: Coolant temperature gauge - Gauges and indicators - Instruments and controls - Peugeot 208 Owners Manual

Peugeot 208: Coolant temperature gauge

Peugeot 208 Owners Manual


With the engine running, when the needle is:

- in zone A , the temperature is correct, - in zone B, the temperature is too high; the maximum temperature and the central STOP warning lamps come on, accompanied by an audible signal and a warning message in the screen.

You MUST stop as soon as it is safe to do so.

Wait a few minutes before switching off the engine.

Contact a PEUGEOT dealer or a qualified workshop.

After driving for a few minutes, the temperature and pressure in the cooling system increase.

To top up the level:

wait for the engine to cool, unscrew the cap slightly to allow the pressure to drop, when the pressure has dropped, remove the cap, top up the level to the "MAX" mark.

Be aware of the risk of burns when topping up the cooling system. Do not fill above the maximum level (indicated on the reservoir).

    Gauges and indicators

    Lighting dimmer control

    Other info:

    Peugeot 208. Parking brake
    If excessive travel or a loss of effectiveness of this system is noticed, the parking brake must be checked, even between two services. Checking this system must be done by a PEUGEOT dealer or a ...

    Peugeot 208. Automated mode
    After starting the vehicle, select position A for enter automated mode. AUTO and the gear engaged appear in the instrument panel screen. The gearbox is then operating in auto-active mode, without ...

    Chevrolet Sonic. Dinghy Towing All except RS Model with Automatic Transmission
    When dinghy towing a vehicle with an automatic transmission, the vehicle should be run at the beginning of each day and at each RV fuel stop for about five minutes. This will ensure proper lubrica ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0106