Peugeot 208: Locking the vehicle with full alarm system
Peugeot 208 Owners Manual
Activation
Switch off the ignition and get out of the vehicle.
Press the locking button
on the remote control.
The monitoring system
is active: the indicator lamp in the button flashes once per second.
After the locking button on the remote control is pressed, the exterior perimeter monitoring is activated after a delay of 5 seconds and the interior volumetric monitoring after a delay of 45 seconds.
If an opening (door, boot...) is not closed fully, the vehicle is not locked but the exterior perimeter monitoring will be activated after a delay of 45 seconds at the same time as the interior volumetric monitoring.
Deactivation
Press the unlocking
button on the remote control.
The alarm system is
deactivated: the indicator lamp in the button goes off.
Other info:
Honda Fit. HFL Menus
The ignition switch must be in ACCESSORY
or ON
to use HFL.
To use HFL, you must first pair your Bluetooth-compatible cell phone to the
system while the vehicle is parked.
Phone Setup
&# ...
Peugeot 208. Dynamic stability control (DSC)
Activation
This system is activated automatically each time the vehicle is started.
It comes into operation in the event of a grip or trajectory problem.
This is indicated by flashing of
this wa ...
Renault Clio. Tyre pressure loss warning
If fitted on the vehicle this system warns
the driver of pressure loss in one or
several tyres.
Operating principle
Each wheel (except for the emergency
spare wheel) has a sensor in the infla ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
