B-Class car manuals
Peugeot 208: Manual air conditioning - Comfort - Peugeot 208 Owners Manual

Peugeot 208: Manual air conditioning

Peugeot 208 Owners Manual

Peugeot 208 / Peugeot 208 Owners Manual / Comfort / Manual air conditioning

The air conditioning system only operates with the engine running.


If you put the air flow control in position 0 (system off), the temperature is no longer controlled. However, a slight flow of air can still be felt, resulting from the movement of the vehicle.

3. Air distribution adjustment

Windscreen and side windows.


Windscreen, side windows and footwells.


Footwells.


Central and side vents.


The air distribution can be adapted
by placing the dial in an intermediate position.

4. Air intake / Air recirculation

The recirculation of interior air insulates the passenger compartment from exterior odours and smoke.

Return to exterior air intake as soon as possible to prevent deterioration of the air quality and the formation of mist.


Press the button to recirculate the interior air. The indicator lamp comes on to confirm this.

Press the button again to allow fresh air into the passenger compartment. The indicator lamp goes off to confirm this.

5. Air conditioning On / Off


The air conditioning is designed to operate effectively in all seasons, with the windows closed.

It enables you to:

- lower the temperature, in summer, - increase the effectiveness of the demisting in winter, above 3 °C.

Switching on

Press the "A/C" button, the button's indicator lamp comes on.

The air conditioning does not operate when the air flow adjustment control 2 is in position " 0".

To obtain cooled air more quickly, you can use recirculation of interior air for a few moments. Then return to fresh air intake.

Switching off

Press the "A/C" button again, the button's indicator lamp goes off.

Switching off may affect comfort levels (humidity, condensation).

    Heating / Ventilation

    Dual-zone digital air conditioning

    Other info:

    Nissan Micra. General maintenance
    During the normal day-to-day operation of the vehicle, general maintenance should be performed regularly as prescribed in this section. If you detect any unusual sounds, vibrations or smells, be s ...

    Seat Ibiza. Starting and stopping the engine
    The engine can only be started using a genuine SEAT key with the correct code. – Move the gear lever to the neutral position and depress the clutch pedal fully and hold it in this position, the ...

    Seat Ibiza. Jump-starting
    Jump leads The jump lead must have a sufficient wire cross section. If the engine fails to start because of a discharged battery, the battery can be connected to the battery of another vehicle to ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0101