Anti-lock braking system (ABS) and electronic brake force distribution (EBFD)
When this warning lamp
comes on, accompanied by an audible signal and a message, it indicates that there
is a fault with the ABS, which could cause loss of control of the vehicle when braking.
When this warning lamp
comes on, coupled with the STOP warning lamp, accompanied by an audible signal and
a message, it indicates that there is a fault with the electronic brake force distribution
(EBFD), which could cause loss of control of the vehicle when braking. You must
stop as soon as it is safe to do so. In both cases, contact a PEUGEOT dealer or
a qualified workshop.
When changing wheels (tyres and rims), make sure that these are approved for your vehicle.
Normal operation of the ABS may make itself felt by slight vibrations of the brake pedal.
In emergency braking, press very firmly without releasing the pressure.
Nissan Micra. Determining vehicle load capacity
The load capacity of this vehicle is determined
by weight, not by available cargo
space. For example, a luggage rack, bike
carrier, cartop carrier or similar equipment
does not increase load carry ...
Peugeot 208. Advice on care and maintenance
Recommendations on the care and maintenance your vehicle are given in the servicing
booklet.
Matt paint
If you vehicle is finished with a clear matt lacquer, please observe the following
recomme ...
Seat Ibiza. Brakes
Brake servo
The brake servo amplifies the pressure you apply to the brake pedal. It works
only when the engine is running. If the brake servo is not functioning due to a
malfunction, or if the ve ...