Driving a car with a manual gearbox
Fig. 101 Centre Console: gear shift pattern of a 5- speed manual gearbox
Selecting the reverse gear
– The vehicle should be stationary with the engine idling. Press the clutch right down. – Place the gear lever into neutral gate and push the lever all the way down.
– Slide the gearstick to the left, and then into the reverse position shown on the gearstick. Certain versions of the model may include a 6-speed manual gearbox, the diagram is shown on the gearstick. The reverse gear can only be engaged when the vehicle is stationary. When the engine is running, before engaging this gear wait about 6 seconds with the clutch pressed in fully in order to protect the gearbox. The reversing lights come on when the reverse gear is selected and the ignition is on.
WARNING
• When the engine is running, the vehicle will start to move as soon as a gear is engaged and the clutch released.
• Never select the reverse gear when the vehicle is in motion. Risk of accident.
Note
• Do not rest your hand on the gear lever when driving. The pressure of your hand could cause premature wear on the selector forks in the gearbox.
• When changing gear, you should always depress the clutch fully to avoid unnecessary wear and damage.
• Do not hold the car “on the clutch” on hills. This causes premature wear and damage to the clutch.
Peugeot 208. Gear lever
P. Park.
- Immobilisation of the vehicle, parking brake on or off.
- Starting the engine.
R. Reverse.
- Reversing manoeuvres, vehicle stationary, engine at idle.
N. Neutral.
- Immobilisation o ...
Nissan Micra. Precautions on seat belt usage
If you are wearing your seat belt properly adjusted
and you are sitting upright and well back in
your seat with both feet on the floor, your chances
of being injured or killed in a collision an ...
Renault Clio. Filters
The replacement of filter components
(air filter, cabin filter, diesel filter, etc.)
is scheduled in the maintenance operations
for your vehicle.
Replacement intervals for filter elements:
refe ...