Folding down rear seats
Fig. 77 Folding up the rear seat cushion
Fig. 78 Button for unlocking the rear backrest
Folding seat down
– Remove the head restraint. – Pull the front edge of the seat cushion ⇒ fig.
77 upwards in the direction of the
arrow. – Lift the cushion forwards
in the direction of the arrow.
– Pull the release button ⇒ fig. 78 in the direction of the arrow and fold the backrest forwards
– Insert the head restraints in their corresponding fastenings.
Folding seat forward
– Remove the head restraints from their fastening on the seat cushion. – Lift the backrest until it correctly engages in the catches. – Check that it has engaged correctly.
– Replace the rear head restraints. – Lower the cushion and push it backwards below the seatbelt buckles. – Press the front part of the cushion downwards.
On split rear seats the backrest and cushion can be lowered and raised respectively in two sections.
WARNING
• Please be careful when folding back the backrest! Injuries can be caused if the backrest is tilted without due care and attention.
• Do no trap or damage seatbelts when raising the backrest.
• After raising the backrest, check it has engaged properly in position.
• The three point automatic seat belt only works correctly when the backrest of the central seat is correctly engaged.
Peugeot 208. Operation
On an ascending slope, with the vehicle stationary, the vehicle is held for a
brief moment when you release the brake pedal:
- if you are in first gear or neutral with a manual gearbox,
- if you ...
Mazda 2. Battery
WARNING
Read the following
precautions carefully before using the battery or inspecting to
ensure safe and correct handling:
Always wear eye
protection when working near the battery:
Working w ...
Chevrolet Sonic. Hill and Mountain Roads
Driving on steep hills or through mountains is different than driving on flat
or rolling terrain. Tips for driving in these conditions include:
Keep the vehicle serviced and in good shape.
Che ...