Sealing
Inflating
Maximum run time of 8 minutes
Once a tyre pressure of 2.0 – 2.5 bar is reached, the journey may be continued at a maximum speed of 80 km/h (50 mph).
Check the tyre inflation pressure after driving for 10 minutes » page 163.
WARNING
CAUTION
Switch off the air compressor after running 8 minutes at the latest – there is a risk of overheating. Allow the air compressor to cool a few minutes before switching it on again.
Check after 10 minutes' driving
Check the tyre inflation pressure after driving for 10 minutes! If the tyre pressure is 1.3 bar or less
Do not drive the vehicle. You
cannot properly seal with tyre with the
breakdown kit.
If the tyre pressure is 1.3 bar or more
Mazda 2. Brake System
Foot Brake
This vehicle has power-assisted brakes
that adjust automatically through normal
use.
Should power-assist fail, you can stop by
applying greater force than normal to the
brake pedal. ...
Nissan Micra. Rear-facing child restraint installation using
LATCH
For additional information, refer to all Warnings
and Cautions in the “Child safety” and “Child
restraints” sections of this manual before installing
a child restraint.
Do not use the lo ...
Chevrolet Sonic. Connecting and Controlling an iPod®
Not all iPods can be controlled by the infotainment system.
Connecting an iPod
Connect the iPod to the USB port.
Searching for a Track
Tracks can be searched for by:
Playlists
Artists
Albu ...