Press MENU to view the DIC menus. Some items display in the upper display area,
some in the lower display area, and others use both the upper and lower display
areas. Use to scroll through the menu
items. Not all items are available on every vehicle. The following is a list of
all possible menu items:
Units
This menu is not available while the vehicle is moving. Press SET/CLR while the
unit display is active and move to
change units when UNIT SET is displayed. Press SET/ CLR to confirm the setting.
You will have to select 1, 2, or 3 for the unit display. 1 is Imperial units, 2
is US units, and 3 is metric units. This will change the displays on the cluster
and DIC to the type of measurements you select.
Language
This menu is not available while the vehicle is moving. Press SET/CLR while the
language display is active and move
to change the language of the displays when LANG SET is displayed. You will have
to select 1 or 2 for the language display. 1 is Alphabet and 2 is Arabic Numeral.
Press SET/ CLR to confirm the setting.
Tire Learn
This menu is not available while the vehicle is moving. This display allows for matching of the TPMS sensors. See Tire Pressure Monitor System and Tire Pressure Monitor Operation.
Remaining Oil Life
This menu is not available while the vehicle is moving. This display shows an
estimate of the oil's remaining useful life. If 99
% is displayed, that means 99% of the current oil life remains.
When the remaining oil life is low, the Code 82 message will appear on the display. The oil should be changed as soon as possible. See Engine Oil. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule. See Maintenance Schedule.
Remember, the oil life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the oil life display accidentally at any time other than when the oil has just been changed.
It cannot be reset accurately until the next oil change. To reset the engine oil life system, press the SET/CLR button while the oil life display is active. See Engine Oil Life System.
Chevrolet Sonic. Floor Mats
Warning
If a floor mat is the wrong size or is not properly installed, it can interfere
with the pedals. Interference with the pedals can cause unintended acceleration
and/or increased stopping d ...
Mazda 2. Drive Selection
Drive selection is a system to switch the vehicle's drive mode. When the
sport mode is
selected, vehicle's response against accelerator operation is enhanced. Use the
sport mode
when higher vehi ...
Fiat Punto. Front seat belt height adjustment
Always adjust the height of the seat belt to fit the person wearing it. This
precaution could greatly reduce the risk of injury in case of collision.
Correct adjustment is obtained when the be ...