Start by vacuuming the surface using a soft brush attachment. If a rotating brush attachment is being used during vacuuming, only use it on the floor carpet. Before cleaning, gently remove as much of the soil as possible using one of the following techniques:
To clean:
1. Saturate a clean lint-free colorfast cloth with water. Microfiber cloth is recommended to prevent lint transfer to the fabric or carpet.
2. Remove excess moisture by gently wringing until water does not drip from the cleaning cloth.
3. Start on the outside edge of the soil and gently rub toward the center. Fold the cleaning cloth to a clean area frequently to prevent forcing the soil in to the fabric.
4. Continue gently rubbing the soiled area until there is no longer any color transfer from the soil to the cleaning cloth.
5. If the soil is not completely removed, use a mild soap solution followed only by plain water.
If the soil is not completely removed, it may be necessary to use a commercial upholstery cleaner or spot lifter. Test a small hidden area for colorfastness before using a commercial upholstery cleaner or spot lifter. If ring formation occurs, clean the entire fabric or carpet.
Following the cleaning process, a paper towel can be used to blot excess moisture.
Chevrolet Sonic. Replacing Safety Belt System Parts after a Crash
Warning
A crash can damage the safety belt system in the vehicle. A damaged safety
belt system may not properly protect the person using it, resulting in serious injury
or even death in a crash. ...
Mazda 2. Changing a Flat Tyre (With Spare Tyre)
NOTE
If the following occurs while driving, it
could indicate a fl at tyre.
Steering becomes diffi cult.
The vehicle begins to vibrate
excessively.
The vehicle pulls in one direction.
I ...
Nissan Micra. Sun visors
To block glare from the front, swing down the
main sun visor.
To block glare from the side, remove the sun
visor from the center mount and swing the
sun visor to the side.
Slide the e ...