If you are parking on a hill and you do not shift the transmission into P (Park) properly, the weight of the vehicle may put too much force on the parking pawl in the transmission. You may find it difficult to pull the shift lever out of P (Park). This is called “torque lock.” To prevent torque lock, set the parking brake and then shift into P (Park) properly before you leave the driver seat. To find out how, see “Shifting Into Park” previously in this section.
When you are ready to drive, move the shift lever out of P (Park) before you release the parking brake.
If torque lock does occur, you may need to have another vehicle push yours a little uphill to take some of the pressure from the parking pawl in the transmission, so you can pull the shift lever out of P (Park).
Chevrolet Sonic. DIC Operation and Displays
The DIC has different displays which can be accessed by using the DIC buttons
on the turn signal lever on the left side of the steering wheel. The DIC displays
trip, fuel, and warning messages if ...
Mazda 2. Recording of Vehicle Data
This vehicle is equipped with a computer which records the following main
vehicle data
related to vehicle controls, operation, and other driving conditions.
Recorded data
Vehicle conditions su ...
Skoda Fabia. Opening and closing the bonnet
Fig. 124 Bonnet release lever/release lever
Fig. 125 Securing the bonnet
Opening
Pull the release lever under the dash panel in the direction of the
arrow
1 » Fig. 124.
Before ope ...