After the “initial check”, it is possible to access the menu screen pressing the button .
To surf the menu press buttons + or –.
Important if after entering the menu no setting/adjustment is performed within
60 seconds, the system exits the
menu automatically and returns to previously displayed screen. In this case the
last selected but not confirmed
setting (through button ) is not
stored and therefore the operation shall be repeated (this stands valid also
when
quitting the menu by pressing the button).
When the car is running, it is possible to access only the reduced menu (for setting “speed limit”).
When the car is stationary access to the whole menu is enabled.
The following diagram shows the cases described.
Chevrolet Sonic. Safety System Check
Now and then, check that the safety belt reminder light, safety belts, buckles,
latch plates, retractors, and anchorages are all working properly. Look for any
other loose or damaged safety belt s ...
Mazda 2. Overheating
If the High engine coolant temperature
warning light illuminates, the vehicle loses
power, or you hear a loud knocking or
pinging noise, the engine is probably too
hot.
WARNING
Switch the ignit ...
Citroen C3. Installing child seats attached using the seat belt
In accordance with European regulations, this table indicates the options for
installing child seats secured using a seat belt
and universally approved (a) in accordance with the weight of the chi ...