When replacing, use the following bulbs.
Brake/Taillight: 21/5 W
Back-Up Light: 16 W
Rear Turn Signal Light: 21 W (Amber)
1. Pry on the edge of the cover using a flat-tip screwdriver to remove the cover.
► Wrap the flat-tip screwdriver with a cloth to prevent scratches.
2. Turn the socket to the left and remove it.
Remove the old bulb.
3. Insert a new bulb.
Peugeot 208. Manual guide-me-home lighting
Temporarily keeping the dipped beam headlamps on after the vehicle's ignition
has been switched off makes the driver's exit easier when the light is poor.
Switching on
With the ignition ...
Chevrolet Sonic. Parking Brake
To set the parking brake, hold the brake pedal down and pull up on the parking
brake lever. If the ignition is on, the brake system warning light will come on.
See Brake System Warning Light.
T ...
Mazda 2. Seat Belt
Fastening the Seat Belt
Position the lap belt as low as possible,
not on the abdominal area, then adjust the
shoulder belt so that it fi ts snugly against
your body.
Unfastening the Seat ...