Honda Fit: Manual transmission models Shifting
Honda Fit Owners Manual
■Shift Lever Operation+
Fully depress the clutch pedal to operate the shift lever and change gears, then slowly release the pedal.
Depress the clutch pedal, and pause for a few seconds before shifting into
, or
shift into one of the forward gears for a moment. This stops the gears so they
do not
“grind.”
NOTICE
Do not shift to 
before the
vehicle comes to a
complete stop.
Shifting to 
before stopping can
damage the
transmission.
NOTICE
Before downshifting, make sure the engine will not go into the tachometer’s red zone. Should this occur, it can severely damage your engine.
When you are not shifting, do not rest your foot on the clutch pedal. This can cause your clutch to wear out faster.
Recommended Shift Points Driving in the highest gear that allows the engine to run and accelerate smoothly helps to optimize fuel economy and effective emissions control. The following shift points are recommended:
If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. When this happens, you may experience a slight jolt.
Other info:
Mazda 2. Emergency Flat Tyre Repair Kit
The emergency fl at tyre repair kit included
with your Mazda is for a temporary repair
of a slightly damaged fl at tyre resulting
from running over nails or similar sharp
objects on the road surfa ...
Peugeot 208. Airbags
System designed to maximise the safety of the occupants (with the exception of
the rear centre passenger) in the event of violent collisions. It supplements the
action of the force-limiting seat b ...
Fiat Punto. Power windows
CONTROLS
Power windows are controlled by two switches located on the
dashboard when the key is at MAR:
to open/close the front left-hand window;
: to open/close the front right-hand window ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
