Applicable Bluetooth ® specifi cation (Recommended) Ver. 2.0
Response profi le
A2DP is a profi le which transmits only audio to the Bluetooth ® unit. If your Bluetooth® audio device corresponds only to A2DP, but not AVRCP, you cannot operate it using the control panel of the vehicle's audio system. In this case, only the operations on the mobile device are available the same as when a portable audio device for a non-compliant Bluetooth® device is connected to the AUX terminal.
X: Available
—: Not available
NOTE
How to Use the Bluetooth ® Audio System
Switching to Bluetooth ® audio mode
To listen to music or voice audio recorded to a Bluetooth ® audio device, switch to the Bluetooth ® audio mode to operate the audio device using the audio system control panel. Any Bluetooth ® audio device must be paired to the vehicle's Bluetooth® unit before it can be used.
Refer to Bluetooth ® Preparation (Type A/ Type B) on page 5-94 .
Make sure that the “ ” symbol
is
displayed in the audio display. The
symbol is not displayed if an un-paired
Bluetooth® audio device is being used
or the vehicle's Bluetooth ® unit has a
malfunction.
NOTE
Some Bluetooth ® audio devices need a
certain amount of time before the “
”
symbol is displayed.
If the current device version is lower than AVRCP Ver. 1.3: “ BT Audio ” is displayed.
If the current device is AVRCP Ver. 1.3: The playback time is displayed.
NOTE
Playback
Selecting a fi le (track)
Selects the next fi le (track)
Short-press the track up button (
).
Selects the beginning of the current fi le
(track)
Short-press the track down button (
).
Fast-forward/Reverse (AVRCP Ver. 1.3)
Fast-forward
Press and hold the fast-forward button ( ).
Reverse
Press and hold the reverse down button
Switching the display (only AVRCP Ver.
1.3)
The information displayed on the audio display changes as follows each time the text button ( 3 ) is pressed during playback.
NOTE
Display scroll
Only 13 characters can be displayed at one time. To display the rest of the characters of a long title, press and hold the text button (3). The display scrolls the next 13 characters. Press and hold the text button (3) again after the last 13 characters have been displayed to return to the beginning of the title.
Bluetooth ® Audio Device Information Display
If a Bluetooth ® audio device is connected, the following information is displayed in the audio display.
X: Available
—: Not available
NOTE
Some information may not display depending on the device, and if the information cannot be displayed, “ NO TITLE” is indicated.
Mazda 2. Bluetooth® Hands-Free (Type C/Type D)
Making a Call
Phonebook Usage
Telephone calls can be made by saying
the contact name in the downloaded
phonebook or the name of a person whose
phone number has been registered in the
Bluetooth® ...
Chevrolet Sonic. Electric Power Steering
The vehicle has electric power steering. It does not have power steering fluid.
Regular maintenance is not required.
If power steering assist is lost due to a system malfunction, the vehicle can
...
Peugeot 208. Failure of the remote control
To deactivate the monitoring functions:
Unlock the vehicle using the key in the driver's door lock.
Open the door; the alarm is triggered.
Switch on the ignition; the alarm stops. The indi ...