The ignition lock is designed so the key cannot be turned to the LOCK position and removed until the shift lever is placed in the P (Park) position.
When removing the key from the ignition switch, make sure the shift lever is in the P (Park) position.
If the shift lever is not returned to the P (Park) position, the ignition switch cannot be moved to the LOCK position.
To remove the key from the ignition switch:
If the shift lever is shifted to the P (Park) position after the ignition switch is turned to the OFF position or when the ignition switch cannot be turned to the LOCK position, proceed as follows to remove the key.
The shift lever is designed so it cannot be moved out of P (Park) and into any of the other gear positions if the ignition switch is turned to OFF position 1 or if the key is removed from the switch.
The shift lever can be moved if the ignition switch is in the ON position and the foot brake pedal is depressed.
There is an OFF position 1 between the LOCK and ACC positions. The OFF position is indicated by a “1” on the key cylinder.
Honda Fit. What to Do If
The ignition switch does
not turn from to
.
Why?
● The steering wheel may be locked.
● Try to turn the steering wheel left and right
while turning the ignition key.
The i ...
Skoda Fabia. Engine oil
The engine has been factory-filled with a high-grade oil that can be use
throughout the year - except in extreme climate zones.
Engine oils are the subject of continuous further development. Thus ...
Skoda Fabia. Rear window
WARNING
Make sure that the mirror is not covered by ice, snow,
condensation or
other objects.
Convex (curved outward) or aspheric exterior mirrors increase
the field of
vision. They do ...