Always check with the Parts Department at a NISSAN dealer for the latest parts information.
* If replacement is required contact a NISSAN dealer.
Replacement procedures
All other lights are either type A, B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover.
Indicates bulb removal
Indicates bulb installation
Interior light
Use a cloth to protect the housing.
Rear combination light
To replace the bulbs in the rear combination light:
Remove bulbs by turning counterclockwise and replace with new bulbs.
High-mounted stop light (Type A)
(if so equipped):
To replace the high-mounted stop light bulb
License plate light
Cargo light
To replace the luggage compartment light bulb:
Seat Ibiza. The structure of this manual
Before reading this manual it must be understood
This manual contains a description of the vehicle equipment at the time of publication.
Some of the equipment described here will not be available u ...
Honda Fit. Heating and Cooling
Using Vents, Heating and A/C
■Heating
The heater uses heat from the engine coolant
to warm the air.
1. Adjust the fan speed using the fan control
dial.
2. Select and
.
3. Adjust t ...
Honda Fit. Maximum Load Limit
The maximum load for your vehicle is 850 lbs (385 kg).
See Tire and Loading Information label attached to the driver’s doorjamb.
This figure includes the total
weight of all occupants, cargo, ...