Head restraint height adjustment
To raise the head restraint, pull it upwards.
To remove the head restraint, press the lug A and pull the head restraint upwards.
To put the head restraint back in place, engage the head restraint stems in the openings keeping them in line with the seat back.
To lower the head restraint, press the lug A and the head restraint at the same time.
The head restraint is fitted with a frame with notches which prevents it from lowering; this is a safety device in case of impact.
The adjustment is correct when the upper edge of the head restraint is level with the top of the head. Never drive with the head restraints removed; they must be in place and adjusted correctly.
Access to the rear seats (3-door)
Pull only this control upwards to fold the seat back and move the seat forward.
When put back in place, the seat returns to its initial position.
Ensure that no person or object prevents the seat slide from returning to its initial position; the return to this position is necessary for longitudinal locking.
Check that the seat belt has reeled in correctly so as to not impede access for passengers to the rear seats.
Chevrolet Sonic. Dome Lamps
The dome lamp controls are in the headliner above the rear seats.
(Dome Lamp Override): Press to turn
the lamps off, even when a door is open.
(Door): When the button is returned
to the middl ...
Seat Ibiza. Driving abroad
Notes
For driving abroad, the following must be taken into consideration:
• For vehicles fitted with a catalytic converter ensure that unleaded petrol
is available for the journey. See the chap ...
Mazda 2. Supplementary Restraint System Components
Driver/Front passenger infl ators and air bags
Crash sensors, and diagnostic module (SAS unit)
Seat belt pretensioners (page 2-18 )
Front air bag sensor
Side crash sensors *
Air bag/s ...