B-Class car manuals
Skoda Fabia: Head restraints - Seats and storage - Using the system - Skoda Fabia Owners Manual

Skoda Fabia: Head restraints

Skoda Fabia Owners Manual

Adjusting the head restraints

Fig. 59 Head restraint: adjusting/removing
Fig. 59 Head restraint: adjusting/removing

Setting the height

  • Grasp the side of the head restraint with both hands and push it upwards as required » Fig. 59 - A
  • To move the head restraint downwards, press and hold the safety button » Fig. 59 - B with one hand and push the head restraint down with the other hand.

Removing/installing

  • Pull the head restraint out of the seat backrest as far as the stop.
  • Press the locking button in the direction of the arrow » Fig. 59 - B and pull the head restraint out.
  • To re-insert the head restraint, push it far enough down into the seat backrest until the locking button clicks into place.

Best protection is achieved if the top edge of the head restraint is at the same level as the upper part of your head.

The head restraints must be adjusted to match the size of the seat occupant.

Correctly adjusted head restraints together with the seat belts offer effective protection for the occupants » page 7.

WARNING

  • The head restraints must be correctly adjusted in order to offer effective protection for the occupants in the event of an accident
  • Never drive with the head restraints removed - there is a risk of injury.
  • If the rear seats are occupied, the rear head restraint must not be in the lower position.

Storing the head restraints in the seat squabs

Fig. 60 Rear seats: Inserting head restraints in the seat cushions
Fig. 60 Rear seats: Inserting head restraints in the seat cushions

The rear head restraints can be inserted into the corresponding holes in the folded seat squabs » Fig. 60.

    Rear seats

    Boot

    Other info:

    Peugeot 208. Rear seat belts
    The rear seats are each fitted with a three-point seat belt, with force limiter and, for the outer seats, an effort limiter. Fastening Pull the strap, then insert the tongue in the buckle. Chec ...

    Chevrolet Sonic. Safety System Check
    Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly. Look for any other loose or damaged safety belt s ...

    Chevrolet Sonic. Ignition Positions
    The ignition switch has four different positions. To shift out of P (Park), the ignition must be in ON/RUN and the regular brake pedal applied. 1 (STOPPING THE ENGINE/LOCK/ OFF): When the vehicl ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0113