Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.
Manual adjustments
Forwards-backwards adjustment
Raise the control and slide the seat forwards or backwards.
Driver's or passenger's seat height adjustment
Pull the control upwards to raise or push it downwards to lower, as many times as necessary, to obtain the position required.
Seat back angle adjustment
Push the control rearwards.
Additional adjustments
Head restraint height adjustment
The head restraint is fi tted with a frame with notches which prevents it from lowering; this is a safety device in case of impact.
The adjustment is correct when the upper edge of the head restraint is level with the top of the head.
Never drive with the head restraints removed; they must be in place and adjusted correctly.
Mazda 2. Laser Sensor
The Smart City Brake Support (SCBS) laser sensor is installed at the top of
the windscreen
near the rearview mirror.
Always keep the surface of the windscreen around the laser sensor clean to ...
Honda Fit. Brightness Control
When the parking lights are turned on and the
ignition switch is in ON , you can
use the
(select/reset) knob to adjust
instrument
panel brightness.
Brighten: Turn the knob to the right.
...
Honda Fit. Shift Lever Does Not Move
Automatic transmission models
Follow the procedure below if you cannot move the shift lever out of the
position.
■Releasing the Lock
1. Set the parking brake.
2. Remove the key from the ...