Always adjust the height of the seat belt to fit the person wearing it. This precaution could greatly reduce the risk of injury in case of collision.
Correct adjustment is obtained when the belt passes half way between the end of the shoulder and the neck.
Four different adjustments in height are provided.
To adjust, press button (A) and lower or raise the grip (B).
Make the height
adjustment when the car is stationary. |
After adjustment,
always check that the slider is anchored in one of the positions provided. To do this, with the button (A) released, exert a further pressure to allow the anchor device to catch if release did not take place at one of the preset positions. |
Citroen C3. Jack socket
This connection box, consisting of a
JACK socket is located on the centre
console.
It permits the connection of portable
equipment, such as a digital audio player
of the iPod ® type.
It r ...
Skoda Fabia. Changing the high beam bulb (halogen projector headlights)
Fig. 157 Removing the bulb for the main beam
Remove the rubber cover 2 » Fig. 154 on page 170.
Turn the connector with the bulb to the stop in the direction of the
arrow
» Fig. 157 an ...
Peugeot 208. Parking lamps
Side markers for the vehicle by illumination of the sidelamps on the traffic
side only.
Within one minute of switching off the ignition, operate the lighting control
stalk up or down depending ...