Versions with single seat
Perform operations in a reverse order with respect to what previously described for the boot extension operation. To prevent buckles from remaining positioned below the cushion, check whether the buckles are always coupled to the respective tongues located on the seat back.
Versions with split seat
Perform operations in a reverse order with respect to what previously described for the boot extension operation. To prevent buckles from remaining positioned below the cushion, couple buckles to the respective side belt branches.
For versions with lap belt, couple the belt to its buckle and keep it raised as the cushion is set back to its normal use position.
For versions with central three-point belt with reel, set the belt back to use conditions (see previous pages), paying attention that the buckles are ready for use.
When refitting the
parcel shelf, fasten the two side tie-rods (A) passing them on the inside of the struts. |
Chevrolet Sonic. Customer Satisfaction Procedure
Your satisfaction and goodwill are important to your dealer and to Chevrolet.
Normally, any concerns with the sales transaction or the operation of the vehicle
will be resolved by your dealer's sa ...
Peugeot 208. Coolant level
The coolant level should be close to the "MAX" mark but should never exceed it.
When the engine is warm, the temperature of the coolant is regulated by the fan.
This can operate with th ...
Fiat Punto. Ignition switch
The key can be turned to 4 different positions:
STOP: engine off, key can be removed, steering column locked.
Certain electrical devices (e.g.: sound system, power windows, etc.)
can work.
M ...