B-Class car manuals
Nissan Micra: Heater operation - Heater and Air Conditioner (manual) (Type B)
(if so equipped) - Display screen, heater, air conditioner, audio and phone systems - Nissan Micra Owners Manual

Nissan Micra: Heater operation

Nissan Micra Owners Manual

Heating

This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets.

  1. Move the air intake lever to the position
    for normal heating.
  2. Turn the air flow control dial to the
    position.
  3. Turn the fan control dial to the desired position.
  4. Turn the temperature control dial to the desired position between the middle and the hot position.

Ventilation

This mode directs outside air to the side and center vents.

  1. Move the air intake lever to the position.

  2. Turn the air flow control dial to the
    position.
  3. Turn the fan control dial to the desired position.
  4. Turn the temperature control dial to the desired position.

Defrosting or defogging

This mode directs the air to the defrost outlets to defrost/defog the windows.

  1. Move the air intake lever to the position.

  2. Turn the air flow control dial to the
    position.
  3. Turn the fan control dial to the desired position.
  4. Turn the temperature control dial to the desired position between the middle and the hot position.
  • To quickly remove ice or fog from the windows, turn the fan control dial to the maximum position and the temperature control dial to the full hot position.

When the or
position is selected,
press the button to turn on the air conditioner for better performance. This will dehumidify the air and help defog the windows.

Bi-level heating

This mode directs cooler air from the side and center vents and warmer air from the floor outlets.

When the temperature control dial is moved to the full hot or full cool position, the air between the vents and the floor outlets is the same temperature.

  1. Move the air intake lever to position.

  2. Turn the air flow control dial to the
    position.
  3. Turn the fan control
    dial to the desired position.
  4. Turn the temperature control dial to the desired position.

Heating and defogging

This mode heats the interior and defogs the windshield.

  1. Move the air intake lever to the position.

  2. Turn the air flow control dial to the
    position.
  3. Turn the fan control dial to the desired position.
  4. Turn the temperature control dial to the desired position between the middle and the hot position.

When the or
position is selected,
press the button to turn on the air conditioner for better performance. This will dehumidify the air and help defog the windows.

Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation.

    Controls

    Air conditioner operation

    Other info:

    Chevrolet Sonic. Seat Adjustment
    Manual Seats To adjust a manual seat: 1. Pull the handle at the front of the seat. 2. Slide the seat to the desired position and release the handle. 3. Try to move the seat back and forth to be ...

    Citroen C3. Running out of fuel (diesel)
    If your vehicle is fi tted with an HDI engine, the fuel circuit must be reprimed if you run out of fuel. This system consists of a repriming pump, a transparent pipe and a degas screw under t ...

    Nissan Micra. RearView Monitor system limitations
    WARNING Listed below are the system limitations for RearView Monitor. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or ...

    Manuals For Car Models



    В© 2016-2020 Copyright www.b-auto.net 0.0134