Honda Fit: Changing the Front Wiper Blade Rubber
Honda Fit Owners Manual
1. Lift the driver side wiper arm first, then the passenger side.
2. Place a cloth on the edge of the lock tab.
Push the lock tab up with a flat-tip screwdriver.
3. Slide the blade from the wiper arm
NOTICE
Avoid dropping the wiper arm; it may damage the windshield.
4. Slide the wiper blade out from its holder by pulling the tabbed end out.
5. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade.
► Correctly align the rubber protrusion and the retainer grooves.
6. Slide the new wiper blade onto the holder from the bottom end.
► The tab on the holder should fit in the indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm, then push down the lock tab.
8. Lower the passenger side wiper arm first, then the driver side.
Other info:
Fiat Punto. Front and side air bags
The car is fitted with driver’s air bag. As optional it can
be fitted with passenger’s air bag, side bags and
window bag.
The front air bag (driver and passenger) has been
designed to protec ...
Peugeot 208. Filling
A self-adhesive label on the inner face of the filler flap reminds you of the
type of fuel to use depending on your engine.
Additions of fuel must be of at least 5 litres to be registered by the ...
Seat Ibiza. Jump-starting
Jump leads
The jump lead must have a sufficient wire cross section. If the engine fails
to start because of a discharged battery, the battery can be connected to the battery
of another vehicle to ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
