Using Vents, Heating and A/C
■Heating
The heater uses heat from the engine coolant to warm the air.
1. Adjust the fan speed using the fan control dial.
2. Select and
.
3. Adjust the temperature using the
temperature control dial.
■ To rapidly warm up the interior
1. Set the fan to the maximum speed.
2. Select .
3. Set the temperature to maximum heat.
4. Select .
Change to fresh air mode as soon as the interior gets warm enough. The windows may fog up if kept in recirculation mode.
■ To dehumidify the interior*
When used in combination with the heater, the air conditioning system makes the interior warm and dry and can prevent the windows from fogging up.
1. Turn the fan on.
2. Press the A/C button to turn on the air conditioning.
3. Select and
. Adjust the temperature to your
preference.
■Cooling
1. Adjust the fan speed using the fan control dial.
2. Select and
.
3. Adjust the temperature using the
temperature control dial.
4. Press the A/C button (the indicator on).
■ To rapidly cool down the interior
1. Set the fan to the maximum speed.
2. Set the temperature to maximum cool.
3. Select .
If the interior is very warm, you can cool it down more rapidly by partially opening the windows.
■Defrosting the Windshield and Windows
1. Select turns the air
conditioning system
on.
2. Select .
■ To rapidly defrost the windows
1. Set the fan to the maximum speed.
2. Select .
3. Select .
4. Set the temperature to maximum heat.
For your safety, make sure you have a clear view through all the windows before driving
.
Do not set the temperature near the upper or lower limit.
When cold air hits the windshield, the outside of the windshield may fog up.
If the side windows fog up, adjust the vents so that the air hits the side windows.
After defrosting the windows, switch over to fresh air mode.
If you keep the system in recirculation mode, the windows may fog up from humidity. This impedes visibility.
Nissan Micra. Brake and clutch (if so equipped) fluid
For additional information on brake fluid specification,
refer to “Recommended fluids/lubricants
and capacities” in the “Technical and consumer
information” section of this manual.
...
Nissan Micra. Forward-facing child restraint installation
using the seat belts
WARNING
The three-point seat belt with Automatic
Locking Retractor (ALR) must be used
when installing a child restraint. Failure to
use the ALR mode will result in the child
rest ...
Peugeot 208. Fitting roof bars
When fitting transverse roof bars, take care to position them correctly on the
retaining pins located in the door apertures.
Use accessories recommended by PEUGEOT observing the manufacturer' ...