Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC 12 V, 10 A).
The ignition must be switched to ACC or ON.
Type A
Type B
CAUTION
To prevent accessory socket damage or electrical failure, pay attention to the following:
Noise may occur on the audio playback depending on the device connected to the accessory socket
Depending on the device connected to the accessory socket, the vehicle's electrical system may be affected, which could cause the warning light to illuminate. Disconnect the connected device and make sure that the problem is resolved. If the problem is resolved, disconnect the device from the socket and switch the ignition off. If the problem is not resolved, consult an expert repairer, we recommend an Authorised Mazda Repairer.
NOTE
To prevent discharging of the battery, do not use the socket for long periods with the engine off or idling.
Renault Clio. To the front seat belts
Depending on the vehicle, they will consist
of:
front seat belt inertia reel pretensioners;
chest-level load limiters;
air bags for driver and front passenger.
These systems are designed t ...
Honda Fit. Fuel Economy
Improving Fuel Economy
Fuel economy depends on several conditions, including driving conditions,
your
driving habits, the condition of your vehicle, and loading. Depending on these
and
other co ...
Seat Ibiza. Tailgate
Opening and locking
The operation of the tailgate opening system is electric. It is activated by
using the handle on the tailgate
Fig. 50 Boot lid: opening from the outside
Fig. 51 Closing th ...