Mazda 2: Active Driving Display
Mazda2 Owners Manual
WARNING
Always adjust the display brightness and position with the vehicle
stopped:
Adjusting the display brightness and position while driving the vehicle is
dangerous as
doing so could distract your attention from the road ahead and lead to an
accident.
CAUTION
- Do not try to adjust the angle or open/close the active driving
display manually.
Fingerprints on the display will make it diffi cult to view and using
excessive force
when operating it could cause damage.
- Do not place objects in the vicinity of the active driving
display. The active driving
display may not operate or any interference with its operation could cause
damage.
- Do not place beverages near the active driving display. If
water or other liquids are
splashed on the active driving display, it could cause damage.
- Do not place objects above the active driving display screen or
apply stickers to the
combiner as they will cause interference.
- A sensor is integrated to control the display's luminosity. If
the optical receiver is
covered, the display's luminosity will lower making the display diffi cult
to view.
- Do not allow intense light to hit the optical receiver.
Otherwise, it could cause damage.
NOTE
- It may be diffi cult to view the display when wearing
sunglasses. Take off your
sunglasses or adjust the luminosity.
- If the battery has been removed and re-installed or the battery
voltage is low, the
adjusted position may deviate.
- The display may be diffi cult to view or temporarily affected by
weather conditions
such as rain, snow, light, and temperature
- If the audio system is removed, the active driving display
cannot be operated.
The active driving display indicates the following information:
- Lane Departure Warning System (LDWS) Operation Conditions and Warnings
Refer to Lane Departure Warning System (LDWS) on page 4-102
- Smart City Brake Support (SCBS) Operation Conditions
Refer to Smart City Brake Support (SCBS) on page 4-123 .
- Vehicle Speed Setting Using Cruise Control
Refer to Cruise Control on page 4-135 .
- Turn-by-Turn (TBT) (Direction and Distance) and Lane Guidance
- Vehicle Speed
Each setting/adjustment for the active driving display can be performed on
the centre
display (Type C/Type D audio).
- Select the icon on the home
screen and display the Settings screen.
- Select the AD-Disp tab.
- Select the desired item and perform the setting/adjustment.
- Height : Active driving display position
- Brightness Control : Method for adjusting screen brightness
(Automatically/Manually)
- Calibration : Brightness initialization setting (when selecting
automatic adjustment)
- Brightness : Brightness adjustment (when selecting manual adjustment)
- Navigation : On/Off
- Active Driving Display : On/Off
- Reset
Other info:
Ford Fiesta. Phone
Phone
Quick Dial
Phonebook
History
Messaging
Settings
Hands-free calling is one of the main
features of SYNC. Once you pair your
phone, you can access many options using
the touchscreen or vo ...
Mazda 2. Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress
the brake pedal and hold in the lock-release
button to shift (The ignition must be switched ON).
Indicates the selector lever can
be shifte ...
Fiat Punto. Spray nozzles
Windscreen wiper
If the jet of fluid is inadequate, firstly check that there is fluid in the
reservoir: see “Checking fluid levels” in this section).
Then check that the nozzle holes are not ...