The ABS control unit continuously monitors the speed of each wheel. If one wheel is about to lock up, the ABS responds by automatically releasing and reapplying that wheel's brake.
The driver will feel a slight vibration in the brake pedal and may hear a chattering noise from the brake system. This is normal ABS system operation. Continue to depress the brake pedal without pumping the brakes.
The warning light turns on when the system has a malfunction.
Refer to Warning Lights on page 4-38 .
WARNING
Do not rely on ABS as a substitute for safe driving: The ABS cannot compensate for unsafe and reckless driving, excessive speed, tailgating (following another vehicle too closely), driving on ice and snow, and hydroplaning (reduced tyre friction and road contact because of water on the road surface). You can still have an accident.
NOTE
Mazda 2. If a Warning Light Turns On or Flashes
If any warning light turns on/fl ashes, take appropriate action for each
light. There is no
problem if the light turns off, however if the light does not turn off or turns
on/fl ashes again,
con ...
Peugeot 208. Accessories
A wide range of accessories and genuine parts is available from the PEUGEOT dealer
network. These accessories and parts have been tested and approved for reliability
and safety. They are all adapt ...
Chevrolet Sonic. Dome Lamps
The dome lamp controls are in the headliner above the rear seats.
(Dome Lamp Override): Press to turn
the lamps off, even when a door is open.
(Door): When the button is returned
to the middl ...