B-Class car manuals
Mazda 2: Ignition Switch - Start/Stop Engine - When Driving - Mazda2 Owners Manual

Mazda 2: Ignition Switch

Mazda2 Owners Manual

Push Button Start Positions

The system operates only when the driver is in the vehicle or within operational range while the key is being carried.

Each time the push button start is pressed, the ignition switches in the order of off, ACC, and ON. Pressing the push button start again from ON switches the ignition off.

Ignition Switch


NOTE

  • The engine starts by pressing the push button start while depressing the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle). To switch the ignition position, press the push button start without depressing the pedal.
  • Do not leave the ignition switched ON while the engine is not running.

    Doing so could result in the battery going dead. If the ignition is left in ACC (For automatic transaxle, the selector lever is in the P position, and the ignition is in ACC), the ignition switches off automatically after about 25 minutes.

Off

The power supply to electrical devices turns off and the push button start indicator light (amber) also turns off.

In this position the steering wheel is locked.

WARNING

Before leaving the driver's seat, always switch the ignition off, set the parking brake, and make sure the selector lever is in P (automatic transaxle) or in 1st gear or R (manual transaxle): Leaving the driver's seat without switching the ignition off, setting the parking brake, and shifting the selector lever to P (automatic transaxle) or to 1st gear or R (manual transaxle) is dangerous. Unexpected vehicle movement could occur which could result in an accident.

In addition, if your intention is to leave the vehicle for even a short period, it is important to switch the ignition off, as leaving it in another position will disable some of the vehicle's security systems and run the battery down.

NOTE

(Locked steering wheel) If the push button start indicator light (green) is fl ashing and the beep sound is heard, this indicates that the steering wheel is not unlocked. To unlock the steering wheel, press the push button start while moving the steering wheel left and right.

ACC (Accessory)

Some electrical accessories will operate and the indicator light (amber) illuminates.

In this position the steering wheel is unlocked.

NOTE

The keyless entry system does not function while the push button start has been pressed to ACC, and the doors will not lock/unlock even if they have been locked manually.

ON

This is the normal running position after the engine is started. The indicator light (amber) turns off. (The indicator light (amber) illuminates when the ignition is switched ON and the engine is not running.) Some indicator lights/warning lights should be inspected before the engine is started (page 4-37 ).

NOTE

(SKYACTIV-G 1.3, SKYACTIV-G 1.5) When the push button start is pressed to ON, the sound of the fuel pump motor operating near the fuel tank can be heard. This does not indicate an abnormality.

    Start/Stop Engine

    Starting the Engine

    Other info:

    Skoda Fabia. Opening and closing the bonnet
    Fig. 124 Bonnet release lever/release lever Fig. 125 Securing the bonnet Opening Pull the release lever under the dash panel in the direction of the arrow 1 » Fig. 124. Before ope ...

    Skoda Fabia. Engine oil
    The engine has been factory-filled with a high-grade oil that can be use throughout the year - except in extreme climate zones. Engine oils are the subject of continuous further development. Thus ...

    Nissan Micra. Drinking alcohol/drugs and driving
    WARNING Never drive under the influence of alcohol or drugs. Alcohol in the bloodstream reduces coordination, delays reaction time and impairs judgement. Driving after drinking a ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0116