WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision. |
For additional information, refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections of this manual before installing a child restraint.
Do not use the lower anchors if the combined weight of the child and the child restraint exceeds 65 lbs (29.5 kg). If the combined weight of the child and the child restraint is greater than 65 lbs (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.
Follow these steps to install a rear-facing child restraint using the vehicle seat belts in the rear seats:
Rear-facing – step 1
Always follow the child restraint manufacturer’s instructions.
Rear-facing – step 2
Rear-facing – step 3
Rear-facing – step 4
Rear-facing – step 5
Rear-facing – step 6
After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled.
Renault Clio. Cruise control
The cruise control function helps you to
maintain your driving speed at a speed
that you choose, called the cruising
speed.
This cruising speed may be set at any
speed above 20 mph (30 km/h ...
Peugeot 208. Displays in the instrument panel
When you move the lever in the gate to select a position, the corresponding indicator
is displayed in the instrument panel.
P. Park
R. Reverse
N. Neutral
D. Drive (Automatic driving)
S. Sport ...
Nissan Micra. Fuel gauge
The gauge indicates A the approximate fuel
level in the tank when the ignition switch is placed
in the ON position.
When one segment remains on the digital fuel
gauge, only one segment will ...