Head restraint height adjustment
To raise the head restraint, pull it upwards.
To remove the head restraint, press the lug A and pull the head restraint upwards.
To put the head restraint back in place, engage the head restraint stems in the openings keeping them in line with the seat back.
To lower the head restraint, press the lug A and the head restraint at the same time.
The head restraint is fitted with a frame with notches which prevents it from lowering; this is a safety device in case of impact.
The adjustment is correct when the upper edge of the head restraint is level with the top of the head. Never drive with the head restraints removed; they must be in place and adjusted correctly.
Access to the rear seats (3-door)
Pull only this control upwards to fold the seat back and move the seat forward.
When put back in place, the seat returns to its initial position.
Ensure that no person or object prevents the seat slide from returning to its initial position; the return to this position is necessary for longitudinal locking.
Check that the seat belt has reeled in correctly so as to not impede access for passengers to the rear seats.
Renault Clio. In case of puncture
Depending on the vehicle, a tyre inflation
kit or emergency spare wheel is
provided (refer to the following pages).
If the emergency spare wheel has been stored for several years, have
i ...
Fiat Punto. Tailgate closing
To close, lower the tailgate until the lock clicks.
If the boot is not shut properly the warning light
comes on together with the message on
reconfigurable multifunction display (where provided)
...
Chevrolet Sonic. Rear Seats
The vehicle's rear seats have adjustable head restraints in the outboard seating
positions.
The height of the head restraint can be adjusted. Pull the head restraint up
to raise it. Try to move ...