With the engine running, when the needle is:
- in zone A , the temperature is correct, - in zone B, the temperature is too high; the maximum temperature and the central STOP warning lamps come on, accompanied by an audible signal and a warning message in the screen.
You MUST stop as soon as it is safe to do so.
Wait a few minutes before switching off the engine.
Contact a PEUGEOT dealer or a qualified workshop.
After driving for a few minutes, the temperature and pressure in the cooling system increase.
To top up the level:
wait for the engine to cool, unscrew the cap slightly to allow the pressure to drop, when the pressure has dropped, remove the cap, top up the level to the "MAX" mark.
Be aware of the risk of burns when topping up the cooling system. Do not fill above the maximum level (indicated on the reservoir).
Chevrolet Sonic. Radio with Touchscreen
The infotainment system can play music or movies by connecting an auxiliary device
to the USB port, if equipped.
USB Support
USB Supported Devices
USB Flash Drives
Portable USB Hard Drives
...
Seat Ibiza. Towing and tow-starting
Tow-starting
The use of jump leads is preferable to tow-starting. We recommend that you do
not tow-start your vehicle. Jump-starting is preferable. However, if your vehicle
has to be tow-started: ...
Peugeot 208. Lighting dimmer control
System for the manual adjustment of the brightness of the instrument panel and
touch screen to suit the ambient light level.
Two buttons
With the headlamps on, press button B to increase the bri ...