Peugeot 208: Locking the vehicle with full alarm system
Peugeot 208 Owners Manual
Activation
Switch off the ignition and get out of the vehicle.
Press the locking button
on the remote control.
The monitoring system
is active: the indicator lamp in the button flashes once per second.
After the locking button on the remote control is pressed, the exterior perimeter monitoring is activated after a delay of 5 seconds and the interior volumetric monitoring after a delay of 45 seconds.
If an opening (door, boot...) is not closed fully, the vehicle is not locked but the exterior perimeter monitoring will be activated after a delay of 45 seconds at the same time as the interior volumetric monitoring.
Deactivation
Press the unlocking
button on the remote control.
The alarm system is
deactivated: the indicator lamp in the button goes off.
Other info:
Fiat Punto. Set-up menu
The number of items in the menu depends on the car
settings.
When travelling, only the “Speed limit” indication is
enabled.
The “Set-up Menu” enables to perform the following
adjustme ...
Honda Fit. Key Types and Functions
This vehicle comes with the following keys:
All of the keys have an immobilizer system. The
immobilizer system helps to protect against vehicle
theft.
The keys contain precision electronics.
Ad ...
Nissan Micra. Determining vehicle load capacity
The load capacity of this vehicle is determined
by weight, not by available cargo
space. For example, a luggage rack, bike
carrier, cartop carrier or similar equipment
does not increase load carry ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
