Folding down rear seats
Fig. 77 Folding up the rear seat cushion
Fig. 78 Button for unlocking the rear backrest
Folding seat down
– Remove the head restraint. – Pull the front edge of the seat cushion ⇒ fig.
77 upwards in the direction of the
arrow. – Lift the cushion forwards
in the direction of the arrow.
– Pull the release button ⇒ fig. 78 in the direction of the arrow and fold the backrest forwards
– Insert the head restraints in their corresponding fastenings.
Folding seat forward
– Remove the head restraints from their fastening on the seat cushion. – Lift the backrest until it correctly engages in the catches. – Check that it has engaged correctly.
– Replace the rear head restraints. – Lower the cushion and push it backwards below the seatbelt buckles. – Press the front part of the cushion downwards.
On split rear seats the backrest and cushion can be lowered and raised respectively in two sections.
WARNING
• Please be careful when folding back the backrest! Injuries can be caused if the backrest is tilted without due care and attention.
• Do no trap or damage seatbelts when raising the backrest.
• After raising the backrest, check it has engaged properly in position.
• The three point automatic seat belt only works correctly when the backrest of the central seat is correctly engaged.
Citroen C3. Ambience lighting
The dimmed passenger compartment
lighting improves visibility in the vehicle
when the light is poor.
Switching on
At night, the illumination of footwell and
the central dashboard stoarge compa ...
Mazda 2. Parking Sensor System
The parking sensor system uses ultrasonic sensors to detect obstructions
around the vehicle
while parking the vehicle in a garage or during parallel parking when the shift
lever is
in reverse (R ...
Nissan Micra. Increasing fuel economy
The following methods are recommended by
NISSAN to increase fuel economy on NISSAN
vehicles. All these recommendations can help
you to achieve a higher level of fuel economy in
your vehicle.
A ...