Renault Clio: Steering wheel/Power-assisted steering

Adjusting the steering wheel height and depth

Renault Clio. Adjusting the steering wheel height and depth


Pull lever 1 and place the steering wheel in the required position; push the lever beyond the point of resistance to lock the steering wheel in place.

Make sure that the steering wheel is correctly locked.

For safety reasons, only adjust the steering wheel when the vehicle is stationary.

Power Assisted Steering

Never drive with an inadequately charged battery.

Variable power assisted steering

The variable power assisted steering system is equipped with an electronic control system which alters the level of assistance to suit the vehicle speed.

Steering is made easier during parking manoeuvres (for added comfort) whilst the force needed to steer increases progressively as the speed rises (for enhanced safety at high speeds).

Never leave the steering wheel at full lock while stationary.

With the engine switched off, or if there is a system fault, it is still possible to turn the steering wheel. The force required will be greater.

Never switch off the ignition when travelling downhill, and avoid doing so in normal driving (assistance is not provided).

READ NEXT:

 Driving position

 Left-hand drive

The equipment fitted, described below, DEPENDS ON THE VERSION AND COUNTRY. Side air vent. Stalk for: direction indicator lights; exterior lights; front fog lights; rear fog light

 Right-hand drive

The equipment fitted, described below, DEPENDS ON THE VERSION AND COUNTRY. Side air vent. Passenger Airbag location. Heating or air conditioning controls. Multimedia touch-screen. Wind

SEE MORE:

 Front seat base trim: Removal - Refitting

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 1 IMPORTANT Before carrying out any work on a safety or proximity system component, lock the airbag computer using the Diagnostic tool. When this function is activated, all the trigger lines are disabled and the airbag instrument panel warning light is c

 Rear brake calliper: Removal - Refitting

Note: The callipers supplied as replacement parts are pre-filled. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). WARNING Prepare for brake fluid outflow, to prevent damage to the mechanical parts and bodywork around the brak

© 2016-2024 Copyright Renault Clio Owners Club