Fig. 135 Button for setting the tyre inflation pressure control value
System settings
A system configuration must be run as follows after adjusting the tyre pressure, after changing one or more wheels, changing the position of a wheel on the vehicle (e.g. swapping the wheels between the axles) or when the warning light lights up while driving.
If the warning light lights up
and does not go out after the system configuration,
this indicates a system fault.
If the warning light flashes ,
there is a system fault.
Tyre pressure indicator
The warning light lights up when
any of the following conditions are true.
WARNING
CAUTION
Honda Fit. Parking Your Vehicle
Do not park your vehicle near flammable objects,
such as dry grass, oil, or timber.
Heat from the exhaust can cause a fire.
When Stopped
1. Depress the brake pedal firmly.
2. Firmly apply the p ...
Peugeot 208. Oil level
The check is carried out either when the ignition is switched on using the oil
level indicator on the instrument panel, or using the dipstick.
This manual check will only be correct if the vehicl ...
Renault Clio. Tyre pressure loss warning
If fitted on the vehicle this system warns
the driver of pressure loss in one or
several tyres.
Operating principle
Each wheel (except for the emergency
spare wheel) has a sensor in the infla ...