Peugeot 208: Automated mode
Peugeot 208 Owners Manual
Following use of the sequential mode, select position A to return to the automated mode.
AUTO and the gear engaged appear
in the instrument panel.
The gearbox then operates in auto-adaptive mode, without any action on the part of the driver. It continuously selects the most suitable gear for:
- optimisation of fuel consumption,
- the driving style,
- the road conditions,
- the vehicle load.
For best acceleration, when overtaking another vehicle for example, press the accelerator pedal firmly to pass the point of resistance.
Other info:
Peugeot 208. 12 V battery
The battery does not require any maintenance. However, check that the terminals
are clean and correctly tightened, particularly in summer and winter.
When carrying out work on the battery, refer ...
Skoda Fabia. Full wheel trim
Pulling off
Hook the clamp found in the vehicle tool kit » page 158 into the
reinforced
edge of the wheel trim.
Push the wheel wrench through the clamp, support on the tyre and pull
off ...
Peugeot 208. Cornering lighting
With dipped or main beams, this function makes use of the beam from a front foglamp
to illuminate the inside of a bend, when the vehicle speed is below 25 mph (approximately
40 km/h) (urban driv ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
