B-Class car manuals
Peugeot 208: Automatic operation - Dual-zone digital air conditioning - Comfort - Peugeot 208 Owners Manual

Peugeot 208: Automatic operation

Peugeot 208 Owners Manual


1. Automatic comfort programme

Three modes are provided for the driver and for the front passenger to select their desired level of comfort in the passenger compartment.

Press the "AUTO" button
repeatedly. The indicator lamp comes on at the first press; the mode activated appears in the digital air conditioning screen.

Provides soft and quiet operation
by limiting air flow.

Offers the best compromise between
a comfortable temperature and quiet operation.

Provides strong and effective air
flow.

When the engine is cold, to prevent too great a distribution of cold air, the air flow will only reach its optimum level gradually.

In cold weather, it favours the distribution of warm air to the windscreen, the side windows and the footwells only.

2 - 3. Driver's - passenger's side settings

The driver and front passenger can each set the temperature to suit their requirements. The value indicated in the screen corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit.


 press the button 2 or 3 down (blue) reduce the value or up (red) to increase it.

A setting around 21 enables you to obtain an optimum level of comfort. Depending on your requirements, a setting between 18 and 24 is usual. In addition, it is recommended that you avoid a left/right setting difference of more than 3.

On entering the vehicle, if the interior temperature is much colder or warmer than the comfort value, there is no need to alter the value displayed in order to obtain the required level of comfort. The system corrects the temperature difference automatically and as quickly as possible.

4. Automatic visibility programme

See "Front demisting-defrosting".


    Dual-zone digital air conditioning

    Resuming manual control

    Other info:

    Chevrolet Sonic. Removing the Flat Tire and Installing the Spare Tire
    1. Do a safety check before proceeding. See If a Tire Goes Flat. 2. Remove the wheel cover, if the vehicle has one, to reach the wheel bolts. 3. Turn the wheel nuts counterclockwise to loosen th ...

    Mazda 2. i-ELOOP
    i-ELOOP is a regenerative braking system. When you depress the brake pedal or use engine braking, the kinetic energy that occurs is converted to electrical energy by the power generator and the ...

    Mazda 2. Seat Belt Pretensioner and Load Limiting Systems
    For optimum protection, the front seat belts and rear outboard seat belts * are equipped with pretensioner and load limiting systems. For both these systems to work properly you must wear the seat ...

    Manuals For Car Models



    В© 2016-2020 Copyright www.b-auto.net 0.0131