Peugeot 208: Changing a wiper blade
Peugeot 208 Owners Manual
Before removing a front wiper blade
Within one minute after switching off the ignition, operate the wiper stalk to position the wiper blades vertically on the windscreen.
Removing
- Raise the corresponding wiper arm.
- Unclip the wiper blade and remove it.
Fitting
- Put the corresponding new wiper blade in place and clip it.
- Fold down the wiper arm carefully.
After fitting a front wiper blade
- Switch on the ignition.
- Operate the wiper stalk again to park the wiper blades.
Other info:
Fiat Punto. If an interior light burns out
For the type of bulb and power rating, see “When needing to change a
bulb”.
CEILING LIGHT
With toggling lens
To change the bulb, proceed as follows:
remove the ceiling light by releasing t ...
Honda Fit. If the EPS System Indicator Comes On
■ Reasons for the indicator to come on
• Comes on when there is a problem with EPS system.
• If you depress the accelerator pedal repeatedly to increase the engine
speed while the engin ...
Skoda Fabia. Specifications and capacity
Specifications and capacity (in l) for vehicles with flexible service
intervals
a) Engine oil VW 505 01 can optionally be used in diesel engines without a
DPF.
Specifications and capacit ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
