The brake/clutch master cylinder reservoir is filled with DOT 3 brake fluid as indicated on the reservoir cap. See Engine Compartment Overview for the location of the reservoir.
There are only two reasons why the fluid level in the reservoir might go down:
Do not top off the brake/clutch fluid. Adding fluid does not correct a leak. If fluid is added when the linings are worn, there will be too much fluid when new brake linings are installed. Add or remove brake fluid, as necessary, only when work is done on the brake/clutch hydraulic system.
Warning
If too much brake fluid is added, it can spill on the engine and burn, if the engine is hot enough. You or others could be burned, and the vehicle could be damaged. Add brake fluid only when work is done on the brake/clutch hydraulic system.
When the brake/clutch fluid falls to a low level, the brake warning light comes on. See Brake System Warning Light.
Citroen C3. Manual air conditioning
Manual control panel
Electric control panel
The heating/ventilation or air conditioning
systems can only operate with the
engine running.
1. Temperature adjustment
Turn the dial from blu ...
Seat Ibiza. Diesel engine 1.9l TDI 74 kW (100 bhp)
General engine data
a) Cetane-Number (cetane index) = Measure of the combustion power of the diesel.
Performance figures
Weights
Trailer weights
Engine oil capacity
...
Mazda 2. Audio Control Switch Operation
Without Bluetooth ® Hands-Free
With Bluetooth ® Hands-Free
Adjusting the Volume
To increase the volume, press up the
volume switch ( ).
To decrease the volume, press down the
volume ...