Displays on the screen
This displays the following information:
- time,
- date,
- ambient temperature (this fl ashes if
there is a risk of ice),
- status of the doors and boot,
- audio sources (radio, CD...),
- trip computer (refer to the "Instruments
and Controls" section).
Warning messages (e.g.: "Emission control system faulty") or information messages (e.g.: "Boot open") may appear temporarily. These can be cleared by pressing the "ESC" button.
Controls
From the control panel of your Audio system, you can:
General menu
Press the "MENU" button to gain access to the general menu , then press the " " or " " buttons to scroll through the various menus:
- radio-CD,
- vehicle confi guration,
- options,
- display settings,
- languages,
- units.
Press the "OK" button to select the menu required.
Radio-CD
With the Audio system switched on, once the "Radio-CD" menu has been selected you can activate or deactivate the functions linked with use of the radio (RDS, REG), or the CD (introscan, shuffl e, CD repeat).
For further details concerning the "Radio-CD" application, refer to the Audio system part of the "Audio and Telematics" section.
Vehicle configuration
Once the "Vehicle Confi guration" menu has been selected, you can activate or deactivate the following equipment:
- wiper linked with reverse gear (refer to the "Visibility" section), - "guide-me-home" lighting (refer to the "Visibility" section), - parking assistance (refer to the "Driving" section).
Options
Once the "Options" menu has been selected, you can start diagnostics of the status of the equipment (active, not active, faulty).
Display settings
Once the "Display settings" menu has been selected, you can gain access to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode.
Once you have selected a setting, press the " " or " " buttons to change its value.
Press the " " or " " buttons to switch respectively to the previous or next setting.
Press the "OK" button to save the change and return to the normal display or press the "ESC" button to cancel.
Languages
Once the "Languages" menu has been selected, you can change the language used by the display (Français, Italiano, Nederlands, Portugues, Portugues- Brasil, Deutsch, English, Espanol).
Units
Once the "Units" menu has been selected, you can change the units of the following parameters:
- temperature (°C or °F), - fuel consumption (l/100 km, mpg or km/l).
Once the fuel consumption units have been set to mpg, the information in the instrument panel screen on speed and distance will also be in mph and miles.
For safety reasons, confi guration by the driver of the multifunction screen must only be done when stationary.
Fiat Punto. Fuse summary table
...
Fiat Punto. Refitting the standard wheel
Proceed as follows:
Following the procedure described previously, raise the car and
remove the spare wheel;
Make sure the contact surfaces between wheel and hub are clean so
that the fas ...
Skoda Fabia. Climatronic (automatic air conditioning
system)
Climatronic in automatic mode ensures the best-possible setting of the
temperature
of the outflowing air, the blower stage and air distribution.
The system also takes sunlight into account, whic ...