The “Trip computer” displays information relating to the operating status of the car. This function comprises the “General trip”, concerning the complete mission of the car and “Trip B”, concerning the partial car mission. This function (as shown in the graph below) is contained within the complete mission. Both functions are resettable.
The “General trip” displays the figures relating to Range, Distance, Aver. Consumpt., Curr. consumpt., Avg. speed, Traveltime. “Trip B” displays information concerning Distance B, Aver. Consump. B, Avg. speed B, Traveltime B (driving time). The “Trip B” function can be excluded. Value selected will be displayed until new information is requested.
Start of journey procedure (reset)
To start a new journey monitored by the “General trip”, with the key to MAR,
press button on right steering
column stalk with mode (see
“Control buttons”).
The reset operation in the presence of the screens concerning the “General trip” makes it possible to reset also the “Trip B”. The reset operation in the presence of the screens concerning only the “Trip B” makes it possible to reset only the information associated with this function.
IMPORTANT The “Range” information cannot be reset.
“Trip computer” information are displayed according to the following diagram:
After resetting “Trip” by pressing the button with
mode, the following functions are
displayed:
Range to empty = shows the distance in km (or miles) that the car can still cover before needing fuel, assuming that driving conditions are kept unvaried.
The display will show “- - - -” in the following cases:
Distance travelled = shows the km (or miles) covered from the start of the new mission (*).
Average consumption = shows the average consumption calculated from the start of the new mission (*); this value can be expressed in km/l or l/100 km or in mpg.
Instant consumption = shows fuel consumption variation, this value is updated constantly. If the car is parked with engine running the display will show “- - - -“. When restarting the car, the instant consumption indication will be displayed again.
Average speed = shows the average speed of the car in relation with total time elapsed from the start of the new mission (*).
Trip time = time elapsed from the start of the new mission (*).
(*) New mission = starts from last reset:
IMPORTANT Lacking information, Trip computer values are displayed with “- - - -”. When restoring normal operating conditions after a failure, calculation will restart regularly without resetting either previous displayed values or the start of a new mission (*).
IMPORTANT After disconnecting/reconnecting the battery, certain displayed values will be equal to “- - - -” until significant data for recalculation are available.
Nissan Micra. Tire pressure
Tire inflation pressure
Check the tire pressures (including the
spare) often and always prior to long distance
trips. The recommended tire pressure
specifications are shown on the Tire
and Loadin ...
Seat Ibiza. How are the figures measured?
Fuel consumption
The consumption and emission details shown on the vehicle data sticker differ
from one vehicle to another.
The fuel consumption and CO2 emissions of the vehicle can be found on th ...
Chevrolet Sonic. Filling the Tank
Warning
Fuel vapors and fuel fires burn violently and can cause injury or death.
. To help avoid injuries to you and others, read and follow all the instructions
on the fuel pump island.
. T ...