Honda Fit: Changing the Front Wiper Blade Rubber
Honda Fit Owners Manual
1. Lift the driver side wiper arm first, then the passenger side.
2. Place a cloth on the edge of the lock tab.
Push the lock tab up with a flat-tip screwdriver.
3. Slide the blade from the wiper arm
NOTICE
Avoid dropping the wiper arm; it may damage the windshield.
4. Slide the wiper blade out from its holder by pulling the tabbed end out.
5. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade.
► Correctly align the rubber protrusion and the retainer grooves.
6. Slide the new wiper blade onto the holder from the bottom end.
► The tab on the holder should fit in the indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm, then push down the lock tab.
8. Lower the passenger side wiper arm first, then the driver side.
Other info:
Skoda Fabia. Driving abroad
In certain countries, it may be possible that the ŠKODA service partner
network
is limited or has not been established. This is the reason why procuring
certain spare parts may be somewhat co ...
Peugeot 208. Selective unlocking
This is set via the
configuration menu.
Complete unlocking is activated by default.
Using the remote control
To unlock the driver's
door only press the open padlock once.
To unlock the ot ...
Honda Fit. Changing a Flat Tire
If a tire goes flat while driving, grasp the steering wheel firmly, and brake
gradually
to reduce speed. Then, stop in a safe place. Replace the flat tire with a
compact
spare tire. Go to a deal ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
