B-Class car manuals
Mazda 2: Active Driving Display - Instrument Cluster and Display - When Driving - Mazda2 Owners Manual

Mazda 2: Active Driving Display

Mazda2 Owners Manual

Active Driving Display


WARNING

Always adjust the display brightness and position with the vehicle stopped: Adjusting the display brightness and position while driving the vehicle is dangerous as doing so could distract your attention from the road ahead and lead to an accident.

CAUTION

  • Do not try to adjust the angle or open/close the active driving display manually.

    Fingerprints on the display will make it diffi cult to view and using excessive force when operating it could cause damage.

  • Do not place objects in the vicinity of the active driving display. The active driving display may not operate or any interference with its operation could cause damage.
  • Do not place beverages near the active driving display. If water or other liquids are splashed on the active driving display, it could cause damage.
  • Do not place objects above the active driving display screen or apply stickers to the combiner as they will cause interference.
  • A sensor is integrated to control the display's luminosity. If the optical receiver is covered, the display's luminosity will lower making the display diffi cult to view.
  • Do not allow intense light to hit the optical receiver. Otherwise, it could cause damage.

NOTE

  •  It may be diffi cult to view the display when wearing sunglasses. Take off your sunglasses or adjust the luminosity.
  • If the battery has been removed and re-installed or the battery voltage is low, the adjusted position may deviate.
  • The display may be diffi cult to view or temporarily affected by weather conditions such as rain, snow, light, and temperature
  •  If the audio system is removed, the active driving display cannot be operated.

The active driving display indicates the following information:

  • Lane Departure Warning System (LDWS) Operation Conditions and Warnings  Refer to Lane Departure Warning System (LDWS) on page 4-102
  • Smart City Brake Support (SCBS) Operation Conditions  Refer to Smart City Brake Support (SCBS) on page 4-123 .
  • Vehicle Speed Setting Using Cruise Control   Refer to Cruise Control on page 4-135 .
  • Turn-by-Turn (TBT) (Direction and Distance) and Lane Guidance
  • Vehicle Speed

Each setting/adjustment for the active driving display can be performed on the centre display (Type C/Type D audio).

  1. Select the icon on the home
    screen and display the Settings screen.
  2. Select the AD-Disp tab.
  3. Select the desired item and perform the setting/adjustment.
  • Height : Active driving display position
  • Brightness Control : Method for adjusting screen brightness (Automatically/Manually)
  • Calibration : Brightness initialization setting (when selecting automatic adjustment)
  • Brightness : Brightness adjustment (when selecting manual adjustment)
  • Navigation : On/Off
  • Active Driving Display : On/Off
  • Reset
    Meters and Gauges

    Warning/Indicator Lights

    Other info:

    Renault Clio. Parking sensor
    Operating principle Ultrasonic detectors, installed in the rear bumper (depending on the vehicle), measure the distance between the vehicle and an obstacle whilst reversing. This measurement is ...

    Ford Fiesta. Introduction
    About This Manual Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and plea ...

    Nissan Micra. Anti-lock Braking System (ABS)
    WARNING The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot prevent accidents resulting from careless or dangerous driving techniques. It can help ma ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0072